Implementasi Metoda Sum Squared Error untuk Identifikasi Kategori Pembakaran Mesin Sepeda Motor 4 Tak Bahan Bakar Bensin

Andrizal - -, Rusfandi - -, Rivanol Chadry -

Abstract


Motorcycles with injection system uses engine scanner tool as a reference for a mechanic when performing a tune-up to find out and get the engine firing conditions were perfect. Unlike the motorcycle carburetor system, relying only on the experience of a mechanic. If using tools, usually using exhaust emission analyzer which only serves to measure the levels of elements and compounds and exhaust emissions and it can not be used to identify the condition of the combustion engine. Besides, not all the workshops have it, just a certain manufacturer authorized workshops, garages and a large scale or related government agencies that have it. There are two categories of combustion engine, the first engine combustion conditions are not perfect and complete combustion conditions. Perfect engine combustion conditions is needed so that maximum engine performance with an efficient use of fuel. This study aims to make a device that is capable of detecting the condition of combustion 4-stroke motorcycle carburetor system using the method of sum square error (SSE) through the value of the data patterns of exhaust emissions based gas sensors. The study, of the five categories of motorcycles with the manufacturer, type and year of manufacture of different shows that, the system made capable of identifying categories of combustion engine based on the SSE on the identification and reference set. The success rate of identification detection system performs the complete combustion of 89.33% and 97.99% of incomplete combustion.


Keywords


identification, combustion conditions, the pattern data.

Full Text:

PDF

References


Bakeri Mustafa, Syarief A, Kusairi Ach.,” Analisa gas buang mesin berteknologi EFI dengan bahan bakar premium”,INFO

TEKNIK, Volume 13 No. 1, Juli 2012.

Eka N.J, Hakam Mohamad, S. Indri,” emisi gas carbon monooksida (co) dan hidrocarbon (hc) pada rekayasa jumlah blade turbo ventilator sepeda motor “supra x 125 tahun 2006,” Volume 16 No 2 Tahun 2014, Jurnal Rotasi Jurusan Teknik Mesin, Politeknik Perkapalan Negeri Surabaya.

EPA. Environmental Protection Agency, “Engine Test Cells/Stands NESHAP.” 28 Aug. 2003.

Honda Technical Service Sub Division. (1991).: Pengantar Teori Motor Bakar Bensin. Jakarta : Astra Honda Training Center, PT. Astra International, Inc.

Isnanda,”Pengaruh Gas Buang Terhadap Kinerja Motor Bensin”, Volume 4 No 2 tahun 2007, Jurnal Teknik Mesin, Politeknik Negeri Padang.

Jayanti, N.E., (2013).,Pengaruh Perubahan Jumlah Blade Supercharger Pada Sepeda Motor Mesin Empat Langkah Terhadap Emisi Gas Buang (CO Dan HC).Politeknik Perkapalan Negeri Surabaya. Surabaya.

Kusuma, W.I.GB. (2002), “Alat Penurun Emisi Gas Buang pada Motor, Mobil, Motor Tempel dan Mesin Pembakaran Tak Bergerak”, Program Studi Teknik Mesin. Universitas Udayana, Kampus Bukit Jimbaran, Bali.

Kementrian Negara Lingkungan Hidup,”Ambang batas emisi gas buang kendaraan bermotor lama” Peraturan Menteri Negara Lingkuangan no 5 tahun 2006.

National instruments application notes,” Testing Automotive Exhaust Emissions,”.tahun 2013.

Novyanto, Okasatria. Tanpa Tahun. Mengenal Motor Bakar.

Rupali V. Chothe, Sunita P. Ugale,” E-Nose for gas detection at vehicle exhaust Using supervised learning algorithm” Volume 1, Issue 4, IJETTS page 145-149, 2012.

Setya B.N, S.Pd.T,”Aplikasi Teknologi Injeksi Bahan Bakar Elektronik (EFI) Untuk Mengurangi Emisi Gas Buang Sepeda Motor”, Volume 2 No 5 Nofember 2007, D3 Teknik Mesin Universitas Negeri Semarang.

Sigit P.H dan Jamyamah Siti,” Alat uji emisi gas buang kendaraan bermotor”, Jurnal penelitian vol 7 hal 5-10, BAPPEDA Jogyakarta, April 2012.

Sutiman,”Upaya Pengendalian Pencemaran Udara Melalui Pengembangan Teknologi Motor Bensin dan EMS”, Universitas Negeri Yogyakarta.2004.

Van, Basshuysen Richard, and Fred Schäfer. Internal Combustion Engine Handbook: Basics, Components, Systems, and Perspectives.Warrendale, PA: SAE International, 2004.

Victor V. Kosegeran, Elia Kendekallo, MSc, Sherwin R. U. A. Sompie, ST., MT, Bahrun, MKes,” Perancangan Alat Ukur Kadar Karbon Monoksida (CO), Karbon Dioksida (CO2) dan Hidro Karbon (HC) Pada Gas Buang Kendaraan Bermotor”, e-Journal Teknik Elektro dan Komputer, Jurusan Teknik Elektro, UNSRAT, Tahun 2013.




DOI: http://dx.doi.org/10.30630/jipr.11.2.22

Refbacks

  • There are currently no refbacks.


Published by Pusat Penelitian dan Pengabdian Kepada Masyarakat Politeknik Negeri Padang, Jurnal Ilmiah Poli Rekayasa| p-ISSN: 1858-3709 | e-ISSN : 2685-3922| DOI: 10.30630/jipr

Creative Commons License