PEMOGRAMAN ARDUINO TERHADAP PENINGKATAN DAYA SEPEDA MOTOR HONDA BEAT FI

Muhamad - Ghozali, Iman - Mawardi, Abd Rohman

Abstract


This study aims to obtain comparative data between the standard Honda BeAT PGM-FI motorbikes and those added by Arduino with an interpolated model. Interpolation is a method for obtaining data based on some known data. The method used is experimental based on relevant references. From the test results, it was found that the standard condition data was 6.2 hp at 2500 and 2655 rpm. while with the addition of Arduino the power value is 6.3 hp at 2500, 2664 and 2750 rpm. So that there is an increase in power of 0.1 hp or 1.58% between standard conditions and those using Arduino interpolation patterns.

Keywords


arduino; power;programmed fuel injection (PGM-FI)

Full Text:

PDF

References


Dalimarta, F.F., Mahdi, M., Jaelani, J. and Wibisono, R.D., 2022. Rancang Bangun Electronic Control Unit Berbasis Arduino pada Mesin Motor Dua Langkah. Jurnal Dinamika Vokasional Teknik Mesin, 7(2).

Setiawan, I. (2021). Analisis Perbandingan Tekanan Tipe Pompa Bahan Bakar Injeksi Dan Tipe Bahan Bakar Mekanik. TEKNOSAINS: Jurnal Sains, Teknologi dan Informatika, 8(1), 32-38

Syuhada, M. A., Maksum, H., & Martias, M. 2019. Pengaruh Pembatasan Tegangan Output Sensor O2 Dengan Menggunakan Mikrokontroller Terhadap Daya, Torsi, Pemakaian Bahan Bakar, Dan Emisi Gas Buang Pada Sepeda Motor 4 Langkah. Ranah Research: Journal of Multidisciplinary Research and Development, 1(3), 613-618.

Yogatama, P., Kardiman, K., & Hanifi, R. 2022. Perancangan Poros, Pulley dan V-belt pada Sepeda Motor Honda BeAT FI 2014. Jurnal Ilmiah Wahana Pendidikan, 8(17), 373-383.

W. K. Ham, M. Ko, and S. C. Park, “A framework for simulation-based engine-control unit inspection in manufacturing phase,” Control Eng. Pract., vol. 59, no. September 2016, pp. 137–148, 2017.

Supriyono et al.,2020. Electronic Kit Controller to Incrase a Motorcycle Engine’s Power and Torque. International Journal of Emerging trenda in Engineering Research, Vol 8 No 6 pp. 2563-2567.

Blegur, I.K.S., 2021. Kajian Interpolasi Dua Dimensi dalam Tabel Nilai Kritik Sebaran F Berbantuan Program Matlab. Fraktal: Jurnal Matematika dan Pendidikan Matematika, 2(1), pp.64-79.

L. Pelliccia, M. Schumann, M. Dudczig, M. Lamonaca, P. Klimant, and G. Di Gironimo, .2018.“Implementation of tactile sensors on a 3-Fingers Robotiq® adaptive gripper and visualization in VR using Arduino controller,” Procedia CIRP, vol. 67, pp. 250–255.

Bisták, P., 2019. Arduino support for personalized learning of control theory basics. IFAC-PapersOnLine, 52(27), pp.217-221.

Maridjo, I.Y. and Angga, R., 2019. Pengaruh pemakaian bahan bakar premium, pertalite dan pertamax terhadap kinerja motor 4 tak. Jurnal Teknik Energi, 9(1), pp.73-78.

Mushawir, M., Hasan, H. and Magdalena, H., 2022. Optimasi Konsumsi Fuel Dump Truck Terhadap Pengaruh Grade Jalan Pada Aktivitas Penambangan Pada PT. Pamapersada Nusantara Kecamatan Sangatta Utara Kabupaten Kutai Timur. MINERAL, 7(2), pp.8-13.

Josephinshermila, P., Malarvizhi, K., Pran, S.G. and Veerasamy, B., 2023. Accident detection using Automotive Smart Black-Box based Monitoring system. Measurement: Sensors, 27, p.100721.


Refbacks

  • There are currently no refbacks.


Published by Pusat Penelitian dan Pengabdian Kepada Masyarakat Politeknik Negeri Padang, Jurnal Ilmiah Poli Rekayasa| p-ISSN: 1858-3709 | e-ISSN : 2685-3922| DOI: 10.30630/jipr

Creative Commons License