ANALYSIS OF THE EFFECT OF LOAD ON THE TROMOL BRAKING SYSTEM TEST EQUIPMENT THROUGH BRAKE PRESSURE PARAMETERS USING A GX 160 ROBOT TYPE MACHINE

Muchlisi Nalahuddin, Ridwan Maulana, Riza Muharni, Ikhsan -

Abstract


Technological developments are currently increasingly rapid and the impact of these developments is that various kinds of design technologies will emerge, especially in the fields of mechanical engineering and automotive methods. Therefore, a lot of research and analysis is needed, one of which is the braking load on the drum braking test equipment through brake pressure parameters using a GX 160 robot type machine. The aim of this research is to determine variations in the braking test equipment on load. The method in this research is data collection through literature study, observation and experimentation. The type of tool in this research is a drum braking test tool. In this study the load was varied from 0 gr to 1300 gr. The research results showed that torque level values ranged from 1,225 Nm to 6.37 Nm, power values ranged from 21,142 Watts to 652,725 Watts, and different rpm rotations due to additional load would reduce the rotation (rpm) ranging from 1663 to 979 rpm, and It was obtained that Pertamax fuel consumption levels ranged from 0.157 ml/s to 0.862 ml/s and Pertalite fuel consumption ranged from 0.157 ml/s to 0.961 ml/s.

Keywords


Loading, braking, descriptive method, Pertamax fuel, Pertalite

Full Text:

PDF

References


R. Sugianto, J. Dewanto, P. Studi, T. Mesin, and U. Kristen, “PEMBELAJARAN,” pp. 1–7.

H. Ambarita et al., “Edisi Cetak Jurnal Dinamis , Juni 2019 ( ISSN : 0216-7492 ) Edisi Cetak Jurnal Dinamis , Juni 2019 ( ISSN : 0216-7492 ),” no. 2, pp. 9–19, 2019.

P. Pendidikan, T. Mesin, S. Sebelas, and A. Sumedang, “GAYA TEKAN PAD REM TERHADAP DISK ROTOR PADA Dadang Hafid,” no. April, pp. 29–34, 2016.

F. R. Wijaya, D. Rahmalina, and H. Sukma, “Rancang Bangun Alat Uji Pengereman Skala Laboratorium,” Pros. Semin. Nas. Penelit. LPPM UMJ, pp. 1–8, 2020.

N. N. Hafizh, M. Yunus, and Wisnaningsih, “Pengaruh Gaya Rem Cakram (Disc Brake), Ketebalan, Cakram, Minyak Rem pada Sepeda Motor Honda Beat Pop 2015, 110 CC,” J. Tekayasa Teknol. dan Sains, vol. 6, no. 2, pp. 83–87, 2022.

Muchlisinalahuddin, “Analisis Prestasi Mesin Motor Bakar Diesel Type Pauss Model 175A Untuk Bahan Bakar Solar Dan Bio Solar,” Energies, vol. 6, no. 1, pp. 1–8, 2018, [Online]. Available: http://journals.sagepub.com/doi/10.1177/1120700020921110%0Ahttps://doi.org/10.1016/j.reuma.2018.06.001%0Ahttps://doi.org/10.1016/j.arth.2018.03.044%0Ahttps://reader.elsevier.com/reader/sd/pii/S1063458420300078?token=C039B8B13922A2079230DC9AF11A333E295FCD8

U. Muchlisinalahuddin, Riza muharni, “Analisis Peforma Dan Komsumsi Bahan Bakar Pada Honda Tiger 2006,” J. Tek. Mesin, vol. 5, no. April, pp. 52–69, 2022.

M. Penelitian, “http://jurnal.umsb.ac.id/index.php/RANGTEKNIKJOURNAL,” vol. 5, no. 2, pp. 6–9, 2022.

S. Ramadhani, U. A. Hamzah, P. T. Mesin, F. T. Unhamz, M. S. Utara, and B. Bakar, “ANALISA PERHITUNGAN PEMBAKARAN PADA MOTOR DIESEL,” vol. 1, no. 1, pp. 1–7, 2019.

A. Herdianto, P. Saksono, and G. Gunawan, “Analisa Perbandingan Penggunaan Bahan Bakar Solar Dengan Biodiesel,” J. Teknol. Terpadu, vol. 1–4, no. 1, pp. 26–32, 2008.

B. Setiadi, “Institut Sains dan Teknologi Nasional Semester Genap 2019-2020,” Progr. Stud. Tek. Mesin Fak. Teknol. Ind. Inst. Sains dan Teknol. Nas., vol. 40, pp. 0–11, 2020.

Ariwibowo, “Laporan Tugas Akhir Perhitungan Ulang Kinerja Mesin Diesel 4 Langkah 1 Silinder Berpendingin Radiator,” pp. 1–20, 2018.




DOI: http://dx.doi.org/10.30630/jipr.19.1.307

Refbacks

  • There are currently no refbacks.


Published by Pusat Penelitian dan Pengabdian Kepada Masyarakat Politeknik Negeri Padang, Jurnal Ilmiah Poli Rekayasa| p-ISSN: 1858-3709 | e-ISSN : 2685-3922| DOI: 10.30630/jipr

Creative Commons License